F065
Kanpoko hodiaren diametro nominala:
- HL Ekipamendu Kriogenikoen Enpresa Arauak gomendatua. Bezeroaren eskakizunen arabera ere ekoiztu daiteke.
- Diseinuko presioa:
- Gomendatua ≤ 16 bar. Edo hautatu Soldatutako Konexio Mota (≤40 bar).
- Kanpoko hodiaren materiala
Baldintza berezirik gabe, barneko hodiaren eta kanpoko hodiaren materiala berdina hautatuko da.
3.1.3 Soldatutako konexio mota
eredua
Konexioa
Mota
Barneko hodiaren diametro nominala
Diseinu-presioa
Materiala
Barneko Hodiaren
Estandarra
Oharra
W010
00X
Soldatutako konexio mota hutsean isolatutako mahuka malgu estatikorako
DN10, 3/8"
8~40 barra
300 Serieko Altzairu Herdoilgaitza
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Kanpoko hodiaren diametro nominala: | |
| Diseinu-presioa | Barneko hodiaren materiala. | A 304 da, | DN40, 1-1/2" | C 316 da, |
| D 316L da, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Diseinu-presioa |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Gomendatua ≤ DN25 edo 1". Edo hautatzen du Hutsean Baioneta Konexio Mota Bridekin eta Torlojuekin (DN10etik, 3/8"ra DN80ra, 3"), Soldatutako Konexio Mota (DN10etik, 3/8"ra DN150era, 6")). | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Estandarra | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Kanpoko hodiaren diametro nominala: |
| HL Ekipamendu Kriogenikoen Enpresa Arauak gomendatua. Bezeroaren eskakizunen arabera ere ekoiztu daiteke. | Kanpoko hodiaren materiala | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Mota | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Estandarra | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Diseinu-presioa. | / | DN25, 1" | DN25, 1" | / | |
| Barneko hodiaren materiala. | / | DN25, 1" | DN25, 1" | / | |
| C 316 da, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Barneko hodiaren diametro nominala:
| Gomendatua ≤ DN25 edo 1". Edo hautatzen du Hutsean Baioneta Konexio Mota Bridekin eta Torlojuekin (DN10etik, 3/8"ra DN80ra, 3"), Soldatutako Konexio Mota (DN10etik, 3/8"ra DN150era, 6")). | Kanpoko hodiaren diametro nominala: |
| HL Ekipamendu Kriogenikoen Enpresa Arauak gomendatua. Bezeroaren eskakizunen arabera ere ekoiztu daiteke. | Diseinuko presioa: |
| Gomendatua ≤ 16 bar. Edo Soldatutako Konexio Mota hautatzen du (≤40 bar) | Kanpoko hodiaren materialaBaldintza berezirik gabe, barneko hodiaren eta kanpoko hodiaren materiala berdina hautatuko da.3.2 Hutsean Isolatutako Hodi Sistema Dinamikoa3/S |
| 3.2.1 Hutsean baioneta konexio mota, pintzekin | eredua |
| Konexioa | Mota |
| Barneko hodiaren diametro nominala | Diseinu-presioa |
| Materiala | Barneko Hodiaren |
| Estandarra | Oharra |
HDB01008
Hutsean isolatutako mahuka malgu dinamikorako baioneta konexio mota, besarkadekin
lDN10, 3/8"
l8 barra
| 300 Serieko Altzairu Herdoilgaitza C 316 da, | Barneko hodiaren materiala. | |
| A 304 da, | B 304L da,C 316 da,D 316L da, | |
| E beste bat da. | HLH | DB01508 |
| DN15, 1/2" | Diseinuko presioa: | Diseinuko presioa: |
| DN20, 3/4" | Diseinuko presioa: | Diseinuko presioa: |
| DN25, 1" | Diseinuko presioa: | Diseinuko presioa: |
| Kanpoko hodiaren diametro nominala: | Diseinuko presioa: | Diseinuko presioa: |
Gomendatutako ≤ 8 bar. Edo hautatzen da hutsean baioneta konexio mota bridekin eta torlojuekin (≤16 bar), soldatutako konexio mota (≤40 bar).Kanpoko hodiaren materialaBaldintza berezirik gabe, barneko hodiaren eta kanpoko hodiaren materiala berdina hautatuko da.
Energia-egoera:
HL-HX-X-Guneak huts-ponpei energia eman behar die eta HL Cryogenic Equipment-i tokiko elektrizitatearen informazioa (tentsioa eta hertzak) eman behar dio.-00-X
3.2.2 Hutsean baioneta konexio mota bridekin eta torlojuekin
eredua
Konexioa
Mota
Barneko hodiaren diametro nominala
Diseinu-presioa
Materiala
Barneko Hodiaren
Estandarra
Oharra
Nominal Diameter of Inner Pipe
00X
8~16 barra
DN10, 3/8"
8~16 barra
300 Serieko Altzairu Herdoilgaitza
Design Pressure
Diseinu-presioa.
08 8 bar da,
16 16 bar da.
Barneko hodiaren materiala.
A 304 da,
B 304L da,
C 316 da,
D 316L da,
E beste bat da.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Hutsean isolatutako fase-bereizleen seriea | DN10, 3/8" | Armeniarra
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrantsesaKanpoko hodiaren diametro nominala:X | DN15, 1/2" | |||||
| FrantsesaGomendatua ≤ 16 bar. Edo hautatu Soldatutako Konexio Mota (≤40 bar).X | DN20, 3/4" | |||||
| FrantsesaEnergia-egoera:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandiarra
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Frantsesa08 8 bar da,00X | eta 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrantsesaSamoarra00X | DN15, 1/2" | |||||
| FrantsesaSindhia00X | DN20, 3/4" | |||||
| FrantsesaTajik00X | DN25, 1" | |||||
| FrantsesaThailandiarra00X | DN32, 1-1/4" | |||||
| FrantsesaUzbeko00X | DN40, 1-1/2" | |||||
| FrantsesaXhosa00X | DN50, 2" | |||||
| FrantsesaZuluera00X | DN65, 2-1/2" | |||||
| FrantsesaOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Energia-egoera:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | 300 Serieko Altzairu Herdoilgaitza | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrantsesaDN15, 1/2"00X | DN15, 1/2" | |||||
| FrantsesaDN20, 3/4"00X | DN20, 3/4" | |||||
| FrantsesaDN25, 1"00X | DN25, 1" | |||||
| FrantsesaW03200X | DN32, 1-1/4" | |||||
| FrantsesaW04000X | DN40, 1-1/2" | |||||
| FrantsesaW05000X | DN50, 2" | |||||
| FrantsesaW06500X | DN65, 2-1/2" | |||||
| FrantsesaW08000X | DN80, 3" | |||||
| HHutsean jaka-hodia00X | DN100, 4" | |||||
| HTxinako oxigeno likidoaren fluxua erregulatzeko balbula00X | DN125, 5" | |||||
| HHandizkako prezioa Txina Txina ISO estandarreko depositua 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSHutsean Ponpa Dinamikoko Sistema00X | Hutsean isolatutako fase-bereizleen seriea | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrantsesaWhatsapp00X | DN15, 1/2" | |||||
| FrantsesaWeChat00X | DN20, 3/4" | |||||
| FrantsesaAlemana00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Greziera
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Daniera
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaosX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armeniarra
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstoniarraX | DN15, 1/2" | |||||
| HLHFrisieraX | DN20, 3/4" | |||||
| HLHGujaratiarraX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandiarra
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoarra00X | DN15, 1/2" | |||||
| HLHDSindhia00X | DN20, 3/4" | |||||
| HLHDTajik00X | DN25, 1" | |||||
| HLHDThailandiarra00X | DN32, 1-1/4" | |||||
| HLHDUzbeko00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZuluera00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
